The CM410 is designed to monitor both the work surface and the operator and will signal an audible and visual alarm when conditions for potential ESD damage are met. No calibration required!
One Operator and Bench Single Wire Continuous Monitor – CM410
One Operator and Mat Constant Ground Monitor
Continuously verifying the integrity of the ground system is critical to an effective ESD protection program. The CM410, single wire monitoring products continuously check the total ground loop, including the operator, the wrist band and the coil cord. The systems are compatible with most single wire wrist straps. This is an entry level monitor, and will ensure a wrist strap is continually working and the worksurface is grounded. A audible alarm and light will signal a failure.
- Checks one wrist strap/person and bench.
- Compatible with any standard wrist strap.
- Easy to use: Simply plug in the wrist strap and connect to bench ground.
- Easy to install: Attach the monitor to the bench with included hardware and bracket, and plug it in
Reliable, Repeatable Results Accuracy and reliability are improved with the design incorporated into our constant monitors. False alarms disappear and adjustments are not necessary. Powered and grounded by an AC adapter, the system is fully automatic and begins sensing when a coil cord is plugged into the unit. A green light indicates a safe connection and a red light and audible alarm communicate an unsafe connection.
Wrist open circuit voltage: 0.7 VDC, +0.1VDC @ < 2mA
Periodic Verification Tool: CM410
PV Mat open circuit voltage: 5.0?7.5 VDC
Dimensions: 1.00? H x 2.40? W x 2.30? D
Alarm indicators: Alarm/LED (green: safe, red: unsafe)
Weight: 7.8 oz
Alarm set point : 6.5 megohm
Power Input: 120VAC?60hz
Audible Alarm: 10 beeps (max); 5 seconds
Power Output: 12VDC, 200mA
Monitoring capabilities: One wrist strap/person/ Bench
Adjustment: No adjustments required