Chopper-Stabilized Electrostatic Fieldmeter 20kV/cm 282M

$795.00

Monroe’s chopper-stabilized circuitry is immune to ionization. Provides optimal performance at a low cost.

Accessories

Accessory Charge Plate System for Model 282

Optional Charge Plate System - model 282CPS for the Monroe Electronics Model 282 fieldmeter. Used for testing of ionizers.

SKU: MONROE_282M Category:

Product Description

The 20kV/cm Digital Stat-Arc, model 282M is a pocket-sized, non-contacting static meter which produces consistently accurate readings, and is easy to use.

Features:

  • 20kV/cm Range
  • Pulsing-beam range finder for always obtaining the correct reading
  • Exclusive Auto-Zero circuit
  • HOLD button captures transient readings
  • Recorder output and 40-hour battery
  • Drift-free accuracy even in ionized environments
  • Charged plate adapter available

With the Model 282M, accuracy is unquestioned. Simply hold the instrument so the range finder LED beams form a non-pulsing circle indicating you’re at exactly the right distance from the target for readings up to 20 kV/cm. Additionally, Monroe’s chopper-stabilized circuitry is immune to ionization, unlike ordinary static locators. Zeroing is push-button simple. Designed for optimal performance as well as low cost you can’t afford not to keep the Model 282M handy for:

  • Monitoring “static-free” electronic workstations
  • Measuring static buildup on webs in converting, laminating, and printing operations
  • Checking grounds and bonding in dry particle/powder transport systems

Simple to use:

1. Turn the instrument ON.

2. Discharge your body by touching a grounded metal object.

3. Point the aperture toward a grounded object and press the ZERO button.

4. Aim the aperture toward the target surface at a distance of 1 inch. Adjust the distance until the flashing beams of the LEDs in the instrument converge. Read the voltage and polarity of the charged surface on the meter display.

For additional measurements repeat step four only.

To freeze the display, press the HOLD button. To read the voltages, start at a greater distance to the target as given under specifications.

Maintenance: The battery should be replaced annually, whenever you plan an extended period of unattended monitoring, or whenever “BAT” appears in the display for more than an instant. To obtain accurate and drift free readings the sensor plate and especially the area around the aperture must be kept absolutely clean at all times. Never touch the aperture with anything – not even a cotton swab.

Product Specifications

Weight 0.3 lbs
Manufacturer