Combo Tester X3, With Dual Plate – 19278

$1,124.94 $1,022.67

Combo Tester X3, With Dual Plate

SKU: DES_19278 Category:

Product Description

  • NEW Compatibility with ESD Glove Test Fixture
  • Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots

  • Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms, Footwear limits 750 kilohms to 35 megohms*
  • Determines that operator’s personal grounding device** is functioning correctly

  • Simultaneous Testing in Up to 3 Seconds
  • Reduces time spent testing personal grounding devices used in ESD Control Plans

  • Solid State Touch Test Button with No Moving Parts
  • Maintains accuracy of tests and extends the lifetime of the tester

  • Split Foot Plate for Testing Foot Grounders (or Shoes)
  • Tests both foot grounders independently at the same time

  • 30 Volt Test Signal
  • Provides accurate tests that are not humidity dependent

  • Relay for Use with Automatic Doors Or Other Locking Systems
  • Controls access to ESD Protected Areas

  • Stainless Steel Foot Plates
  • Easy to clean and maintain

  • Optional Stand
  • Use the Desco 19255 stand as an alternate installation method for the Combo Tester X3

  • Calibration Unit Available for Accurate Performance And Conformity Testing In The Field
    See Desco Item 50424
  • NIST Calibrated
  • Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration

  • 100-240VAC Power Adapter with Interchangeable Plugs
    Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
  • Made in the United States of America
  • This item is made and stocked in Chino, CA
    * Default test ranges listed. Additional test settings are noted in the tech bulletin TB-3034.

    ** The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.

Product Specifications

Weight 11.38 lbs